Redox controllers ...

  Company profile
  Plant & equipment
  Legionnaires' disease 
  Contact us

Type IN.RX.2 - for cooling water bromine control.

Redox controller - Type IN.RX.2
Wall mounting instrument with fixing kit.
LED display of redox range (0 to 1000mv)
3 LED's for indication of system status.
2 On/Off control setpoints.
4 - 20 mA output signal.
Plastic enclosure with clear lid.
Choice of flow cell or dip type electrodes.
110volt and 230 volt versions available.

Redox controller - Type IN RX2

Redox controller - Type IN.RX.2 The redox controller type IN.RX.2 is primarily designed to monitor the redox level of water. It's main purpose is to switch output relays if the redox level goes above (or below) adjustable setpoints.

The instrument is enclosed in a plastic box, with a gasketed screw down clear plastic lid, and is supplied complete with a wall fixing bracket and screws. It features a digital display of the redox value, and has two independently adjustable set points.

These set points are adjusted through the instrument range from 10 - 1000mv by the multi turn potentiometer, recessed into the facia. External connections from the electrode are made via a BNC connector on the front of the instrument.

As standard, the IN.RX2 controller uses an insertion type probe and flowcell for fitting inline, which connects to the instrument via a front mounted BNC connector. Dip type probes available as an option which can be supplied to any length required.