Chemical dosing pumps ...

  Home
  Company profile
  Chemicals
  Plant & equipment
  Legionnaires' disease 
  Contact us
  Links
 

ID.SR B - Control dosing frequency.

ID.SR B Chemical dosing pump
A range of electronic solenoid pumps
Multifunction programmable microprocessor
Precise electronic frequency control
Simply controlled from touch sensitive buttons on facia
16 digit 2 line LCD display
Optional low level protection
Priming valve as standard
IP 65 enclosure in high temperature resistant plastic
ID.SR B Type - Chemical dosing pumps
The ID.R range of chemical dosing pumps, are multifunctional electronic solenoid driven dosing pumps which incorporate various electronic control options.

The ID.SR B version has frequency control only. This can be controlled by the facia mounted on/off switch. The frequency is linearly controlled via the two arrows on the front facia, with the stroking speed in strokes per minute (S.P.M). being displayed. This can be controlled from 0-100% ie 0-120 strokes per minute. A green LED indicates that power is on, and a red LED pulses in time with the pumps stroking speed. If your ID.SR.B pump has an alarm facility (eg. low level switch or remote control), then the Green LED will turn orange in the event of the alarm being activated and the dosing pump will stop until the previous condition has been restored.

Standard accessory kit :
The pumps are are supplied complete with a standard set of hoses/fittings and integral priming valve.

They are available in the following 3 sizes

4 litres / Hour at 18 Bar max.

10 litres / Hour at 8 Bar max.

15 litres / Hour at 4 Bar max.

Power supply.

Standard 230 VAC +/- 10% 50/60Hz.

Options 110 VAC +/- 10% 50/60Hz

24 VAC / 24 VDC.

66 Watts, 0.3 Amps Std. 1.6 Amps max.