Simplex
Autotrol 255 Series
Specification :
Resin capacity 10 - 75litres
Flow rate 0.4 to 3.0 cu. metres/hr
Capacity 1670 - 12,525 litres
between regens
Dimensions 8" x 17" to 13" x 54"
I/O connections 3/4"BSP female
Additional information :
Meter & time clock control versions supplied.
Softeners of 14litres and below supplied with 59min regen valve, 20litres and above supplied with 118minute regen valve.
Brass 3/4" and 1" female manifolds are available on request.
Blender manifolds (1" female/brass) are available on request.
To prevent damage to the resin vessel these softeners must be protected from negative pressure from the drain or supply. Air break check valves are recommended for the inlet supply.
All 255 series valves are supplied in 12v form, together with a pludin 12v transformer included.
Fleck 5600 Series
Specification :
Resin capacity 20 - 75litres
Flow rate 0.8 to 3.0 cu. metres/hr
Capacity 3,340 - 12,525 litres
between regens
Dimensions 8" x 35" to 13" x 54"
I/O connections 1"BSP male
Additional information :
Meter & time clock control versions supplied.
Fleck 5600SE valves have a fully programmable regen cycle, variable default regen frequency, immediate or delayed regen options & electronic LED display.
Fleck 6700 valves are the same as 5600SE plus automatic reserve calculation (based upon resin volume, water hardness & recent average water usage), LCD display showing current mode of operation and plastic cover.
To prevent damage to the resin vessel these softeners must be protected from negative pressure from the drain or supply. Air break check valves are recommended for the inlet supply.
All 5600 series valves are 240v. 5600SE & 6700 valves are 24v and are supplied with a pludin 24v transformer included.
|
Duplex
Fleck 9000 3/4" Series
Specification :
Resin capacity 30 - 100 litres
Flow rate 1.2 to 4.0 cu. metres/hr
Capacity 5,010 - 16,700 litres
between regens
Dimensions 10" x 35" to 14" x 65"
I/O connections 1"BSP female
Additional information :
Meter control .
All Fleck 9000 series valves are 24v and supplied together with a plugin 24v transformer included.
All 9000 systems include stainless sreel braided interconnecting hoses.
To prevent damage to the resin vessel these softeners must be protected from negative pressure from the drain or supply. Air break check valves are recommended for the inlet supply.
Fleck 9000 1" Series
Specification :
Resin capacity 80 - 250 litres
Flow rate 3.2 to 4.8 cu. metres/hr
Capacity 13,360 - 41,750 litres
between regens
Dimensions 13" x 54" to 21" x 60"
I/O connections 1"BSP female
Additional information :
Meter control .
All Fleck 9000 series valves are 24v and supplied together with a plugin 24v transformer included.
All 9000 systems include stainless sreel braided interconnecting hoses.
To prevent damage to the resin vessel these softeners must be protected from negative pressure from the drain or supply. Air break check valves are recommended for the inlet supply.
|